Concealed or exposed shower mixer: which one for your bathroom?
The first decision in a shower is where the mixer goes: inside the wall, or on it. Both control water the same way. The difference is in how the wall looks, when you have to decide, and what servicing involves.
Concealed mixer
The valve body is set inside the wall during construction or renovation. Only the plate and handle show. Pipes, spout and shower arm come out of the wall separately.
- Looks: a clean, flat wall. Easier to wipe down.
- When to decide: before plastering and tiling. The body has to be set at the right depth for your tile thickness.
- Servicing: the cartridge comes out from the front, through the plate. You don’t break tiles to service a good concealed mixer.
- Best for: new houses and full bathroom renovations.
Exposed (wall-mounted) mixer
The whole mixer sits on the wall and connects to two pipe points. The shower and spout connect to the mixer itself.
- Looks: the fitting is visible; it suits a more traditional bathroom.
- When to decide: any time. It is the simple choice when the tiles are already done.
- Servicing: everything is reachable from outside.
- Best for: replacing an old mixer without touching the tiles.
What a complete concealed shower needs
Five pieces, ideally in one finish so they match on the wall:
- Concealed mixer with diverter (sends water to the rain shower, the spout or the hand shower)
- Bath spout
- Rain shower head
- Shower arm (wall or ceiling)
- Hand shower with hose and holder
Pick square or round and keep the same shape across all five. Square plates suit straight-edged tiles and vanities; round plates suit softer, curved basins.
Before you plaster
- Agree the finished tile thickness with your plumber before the body goes in.
- Pressure-test the pipes before the wall is closed.
- Keep the protective cover on the mixer body until the tiles are finished.
Not sure which suits your bathroom? Bring your plan or a photo of the wall to the showroom, or send it to us on WhatsApp.
Last updated 16 Nov 2026.